Imaging & Optical

Automatic Image Adjustment

Linear, PE

Color Palettes

Selectable 8-bit

Detector Pitch

15 µm

Detector Type

High Operating Temperature (HOT) MWIR T2SLS

Digital image enhancement

High sensitivity mode (HSM)

Field of view (FOV)

14.4° × 11.5°

f-number

f/1.59

Focal Length

38 mm

Focus

Motorized

Gas Sensitivity [NECL]

NECL: 1 m ΔT 10°C Methane: 16 ppm × m Hydrocarbons (niabara gas mix): 6.4 ppm × m

Image Frequency

30 Hz

Image Modes

IR image, high sensitivity mode (HSM)

IR Resolution

640 × 512

Minimum Focus Distance

0.5 m (1.64 ft)

Non-Radiometric IR Video

Streaming H.264 or MJPEG over RTSP

Non-radiometric IR video recording

None

Overlay

RTSP only

Radiometric IR video recording

None

Radiometric IR video streaming

GigE Vision

Sensor Cooling

FLIR FL100 Linear cooler

Spectral Range

3.2–3.4 μm

Thermal Sensitivity/NETD

<15 mK at 25°C

Zoom

Digital zoom, 1x, 2x, 4x, 8x

Measurement & Analysis

Accuracy

≤100°C ±2°C, >100°C ±2% of reading

Ambient Drift Compensation [with factory cal]

Yes

DC Voltage

Range: 18 V-56 V

Object Temperature Range

-10°C to 120°C (14°F to 248°F)

Communication & Data Storage

Command and Control

GEV: Genicam; RTSP: Web Interface, REST API

Communication Interfaces

Ethernet

Digital I/O connector type

M12 12-pin A-coded, Male (shared with external power)

Digital Inputs

2x opto-isolated, Vin(low)= 0–1.5 V, Vin(high)= 3–25 V

Digital Outputs

3x opto-isolated, 0–48 V DC, max. 350 mA; solid-state opto relay; 1x dedicated as Fault output (NC)

Storage Media

None

Synchronization Modes

Sync In

General

Box Contents

Camera w/lens; M12 to RJ45F Cable (0.3 m), quick start guide, certificate of calibration

Size [L × W × H]

229 × 76 × 95 mm (9.0 × 3.0 × 3.8 in)

Size [L x W x H ] w/o Lens

200 × 76 × 92 mm (7.9 × 3.0 × 3.6 in)

Weight

1.48 kg (3.22 lbs)

Weight [without lens]

1.32 kg (2.9 lbs)

Power

Power Consumption

25 W (cool down)

Power Source

Primary power source: PoE+ type 2 (30 W min)
Optional DC connection: M12 12-pin A-coded, male (shared with Digital I/O)

Environmental & Certifications

Directives

EMC: 2014/30/EU, WEEE: 2012/19/EU

EMC

EN55032:2015/A11:2020
EN55035:2017/A11:2020
FCC Part 15, Subpart B ClassA
KC C 9832 and KS C 9835

Encapsulation

IP50

Mounting

With mounting plate – 2 × 1/4″-20 tapped holes, 1 × 3/8″-16; tapped hole, 4 × #10-24 tapped holes Without mounting plate – 6 × #6-32

Operating Temperature Range

-20°C to 50°C (-4°F to 122°F)

Shock

25 g, 6 ms; Half sine; ± 500 shocks; X,Y&Z (IAW MIL-STD-810H)

Vibration

10-58 Hz, 0.15 mm; 58-500 Hz, 2 g; 5 cycles, 1 oct/min; X,Y&Z (IAW MIL-STD-810H)